Wiping filler for pores, black, 250 g

• Wiping filler for pores, black, 250 g

Wiping filler for pores, black, 250 g

Black wipe filler for "porous" CFRP surfaces (for sealing pinholes)

Technical data:
Density: approx. 1.83 g/cm³
Thinner: Acetone (if required)
Drying/curing: wipe off at 20 °C after 20 minutes, at 40 °C after 10 minutes

Processing:

• Preparation of the surfaces:
  CFRP surfaces to be coated must be clean and sanded with fine sandpaper from grain size 240.
• Apply the pore-wiping filler:
  Apply with a cotton cloth or sponge and wipe off after drying so that the closed pores in the surface remain filled.
  Do not clean the surface treated with pore-wiping filler with solvent, carefully remove sanding dust only with compressed air and a duster
• Paint:
  After wiping and removing the dust, paint the surface with clear varnish. The initially grey drying porous filler will then become as black as the carbon fibre.